The G.I. Lean™ Cyclone Power Mixer has a powerful cyclone mixing blade to mix your G.I. Lean™ shake to perfection. It also consists of a portable Nutristore, is leakproof and dishwasher safe.


Installing the batteries:
  1. Turn the bottom of the base counterclockwise to access the battery compartment.
  2. Insert 2 AAA-sized batteries according to the correct polarities.
  3. Replace batteries when the cyclone mixing action weakens or slows down.
Using the mixer:
  1. Make sure the power base is securely attached and the battery compartment cap is locked.
  2. Turn counterclockwise to unlock the mixer’s lid and lift to open.
  3. Fill liquid to pass the minimum measuring line (160 ml). For best results, fill liquid to cover the entire mixing blade.
  4. Add your favourite G.I. Lean™ Firm & Lean Shake powder and other desired liquid or powder ingredients.
  5. Place the mixer’s lid onto the tumbler and turn clockwise until the lid is locked and sealed.
  6. Check and make sure the flip-open cap on the lid is pushed all the way down and secured.
  7. Push the on/off switch located on the power base to turn on the mixer.
  8. Tilt the mixer left and right a few times to ensure all powder and ingredients are mixed with liquid.
Cleaning the mixer:
  1. Turn off the mixer and open the lid.
  2. Detach and remove the power base from the tumbler by turning the power base counterclockwise.
  3. Do not immerse the power base into water, or wash the whole mixer with the power base attached.
  4. Clean the lid, tumbler and Nutristore attachment separately with water and liquid detergent or place in dishwasher on the top shelf, on a normal cycle.
  5. Do not bend or twist the mixing blade in the mixer. Clean the blade with care.
  1. Do not tamper with the mixing blade.
  2. Do not fill past MAX FILL LINE.
  3. Do not drink without lid on mug.